Cp2104 usb to uart bridge controller driver

#CP2104 USB TO UART BRIDGE CONTROLLER DRIVER SERIAL#
#CP2104 USB TO UART BRIDGE CONTROLLER DRIVER DRIVERS#
#CP2104 USB TO UART BRIDGE CONTROLLER DRIVER SOFTWARE#

This allows any pin to be accessed easily while the adapter is plugged into a solderless breadboard, as shown in the left picture below.ДЄlternatively, a 1Г—6 header can be soldered to the end of the board, as shown in the right picture below. 'Ring indicator' control input (active low)ДЄll of the adapterвЂ™s pins are available in two rows spaced 0.5вЂі apart along the sides of the board. 'Data carrier detect' control input (active low) 'Data terminal ready' control output (active low) (often used with DSR) 'Data set ready' control input (active low) (often used with DTR) вЂњReady to sendвЂќ control output (often used with CTS) вЂњClear to sendвЂќ control input (often used with RTS)

#CP2104 USB TO UART BRIDGE CONTROLLER DRIVER SERIAL#

Supported baud rates: 300В bps to 2В MbpsДЄsynchronous serial data transmit (idle high).

Logic voltage level: 3.45В V (5В V tolerant).

Dimensions: 0.6вЂіВ Г—В 0.95вЂі including connector.

This product requires a USB A to Micro-B cable (not included) to connect to a computer.ДЇor a similar adapter with a USB Mini-B connector, please see the Pololu USB-to-Serial Adapter.

#CP2104 USB TO UART BRIDGE CONTROLLER DRIVER DRIVERS#

Drivers are available from Silicon Labs for WindowsВ XP, WindowsВ Vista, WindowsВ 7, WindowsВ 8, WindowsВ 10, Linux, and MacВ OSВ X. The CP2104 is a full-speed USBВ 2.0 device and allows baud rates of up to 2В Mbps.

#CP2104 USB TO UART BRIDGE CONTROLLER DRIVER SOFTWARE#

The adapter looks like a standard virtual serial port (COM port) to the computerвЂ™s operating system, which means it can be used with any software designed to work with a serial port (even a legacy RS-232 port). The green LED on the SUSPEND line indicates an active USB connection when lit. This board uses 3.45В V signal levels by default, but the signal pins can tolerate higher voltages, allowing the adapter to be used with 5В V systems that see 3.45В V as a logic high. It offers several options for accessing the data, control, and GPIO pins on the CP2104, all of which are made available on a 0.1вЂі spacing. The tiny unit measures only 0.6вЂіВ Г—В 0.95вЂі including its Micro-USB connector. This USB-to-serial adapter is a breakout board for the Silicon Labs CP2104 USB-to-UART bridge, and it is a great solution for connecting microcontroller projects and other logic-level serial devices to a personal computer. OverviewД¬P2104 USB-to-serial adapter carrier, bottom view with dimensions. Its lower-priced successor, the CP2102N USB-to-Serial Adapter Carrier can be used as a drop-in replacement in most applications, and it offers a few improvements including support for higher baud rates (up to 3В Mbps) and a re-programmable configuration ROM.

Note: This product is not recommended for new designs (NRND) based on Silicon Labs designating the CP2104 as NRND.

Cp2104 usb to uart bridge controller driver